74
5. Installation and Connections
(Example) When using to project on a 150" screen
[
6650HDA
/
6645AHD
]
According to the “Table of screen sizes and dimensions” (
→
page
), H = 130.8"/332.1 cm, V = 73.6"/186.8 cm.
Adjustment range in the vertical direction: the projected image can be moved upwards 0.62 × 73.6"/186.8 cm
≈
45.3"/115 cm (when the lens is at the center position).
Adjustment range in the horizontal direction: the projected image can be moved to the left 0.25 × 130.8"/332.1 cm
≈
32.7"/83 cm, to the right approximately 32.7"/83 cm.
[
6650WA
/
6645WA
]
According to the “Table of screen sizes and dimensions” (
→
page
), H = 127.3"/323.1 cm, V = 79.5"/201.9 cm.
Adjustment range in the vertical direction: the projected image can be moved upwards 0.59 × 79.5"/201.9 cm
≈
46.9"/119 cm (when the lens is at the center position).
Adjustment range in the horizontal direction: the projected image can be moved to the left 0.28 × 127.3"/323.1 cm
≈
35.4"/90 cm, to the right approximately 35.4"/90 cm.
* Figures differ by several % because the calculation is approximate.
WARNING
* Installing your projector on the ceiling must be done by a qualified technician. Contact your
Dukane
dealer for more
information.
* Do not attempt to install the projector yourself.
• Only use your projector on a solid, level surface. If the projector falls to the ground, you can be injured and the
projector severely damaged.
• Do not use the projector where temperatures vary greatly. The projector must be used at temperatures between
41°F (5°C) and 104°F (40°C) (Eco mode selected automatically at 95°F to 104°F/35°C to 40°C).
• Do not expose the projector to moisture, dust, or smoke. This will harm the screen image.
• Ensure that you have adequate ventilation around your projector so heat can dissipate. Do not cover the vents on
the side or the front of the projector.
Reflecting the Image
Using a mirror to reflect your projector’s image enables you to enjoy a much larger image when a smaller space is
required. Contact your
Dukane
dealer if you need a mirror system. If you’re using a mirror system and your image is
inverted, use the MENU and
▲▼◀▶
buttons on your projector cabinet or your remote control to correct the orienta-
tion. (
→
)
