DUI BlueHeat, Руководство пользователя

Страница: 11 / 34

Opening the SBS™ Canister
1.The SBS™ should be dry and free of moisture before opening it.The
SBS™ should only be opened in a dry environment.
2. Undo the two locking stainless steel latches
3. Pull the SBS™ cap off by using your hands and applying even force. Be
careful not to pull on the wires between the battery pack and SBS™ cap
once open.
4. Disconnect the battery pack from the SBS™ cap.
5. Be careful not to damage the O-ring, O-ring surfaces on the cap and/or
sealing surfaces on the canister.
Reinstalling the Battery Pack into the SBS™
1.Take the time to inspect the O-rings on the SBS™ cap before every dive.
The O-rings should be free of grit or dirt and should not have any signs of
damage.
2. Remove the O-rings from the cap and wipe them down with a clean cloth
before every dive.The O-rings should be lubricated lightly with silicone
grease, any regulator grease or Dow 111 equivalent.The O-ring groove on
the cap should also be free of any dirt or debris. Be careful not to damage
the sealing surface on the cap or canister body. Insert the battery pack
with connector on top into the canister body. Connect the battery pack
to the SBS™ cap.
3. Orientate the SBS™ cap so that the wires will lay flat. See FIG. 4.
10
BLUEHEAT™ SYSTEM__________
UNCONTROLLED IF PRINTED QSP-711-101
FIG. 3