DUI BlueHeat, Руководство пользователя

Страница: 20 / 34

moisture transport.The combination of stretch materials is critical in the
design of the Liner so that it places and holds the heating pads close and
evenly over the surface of the skin.The Liner configuration prevents “ride up”
which can generate hot spots due to folds in the heating pads.
The heating pads are made with stainless steel MicroWire® which has up to
150% to 200% more tensile strength over typically used elements made of
copper, aluminum, nickel-chromium alloys, etc. Combined with the superior
flex strength, this makes it ideal for the demands of diving. In addition, stainless
steel-based MicroWire® has low thermal inertia meaning that temperature
changes happen rapidly. Low thermal inertia makes the System easier to
control as it responds quickly once activated. Each of the four heating pads has
a high limit thermal control board which keeps the maximum pad temperature
less than 120ºF (49ºC).
The Liner also has conduits in the arms and legs for the accessory wiring
harness for the accessory gloves and socks.
!! WARNING !!
The fit of the liner is critical. If the liner is too big, the
four heating pads may not sit evenly over the surface of
the diver resulting in a hot spot and potentially a burn.
!! WARNING !!
Do not use DUI’s BlueHeat™ Liner, Gloves or Socks
with any other battery system than DUI’s SBS™.
Failure to do so may cause damage to the
garment and/or a burn.
ACCESSORY WIRING HARNESS
The accessory wiring harness facilitates the use of BlueHeat™ gloves and
socks.The harness can be easily added when gloves and socks are in use or
removed when gloves and socks are not in use to eliminate bulk.
Size Chart
Height Spine to wrist
Small 5’0”-5’4” 25”-26”
Medium 5’5”-5’10” 27”-28”
Large 5’11”-6’3” 29”-30”
19
BLUEHEAT™ SYSTEM__________
UNCONTROLLED IF PRINTED QSP-711-101