Duerkopp Adler 4181i, Инструкция по эксплуатации

Страница: 26 / 38

1
Part B - The instructions for assembling with standard drives
1. Safety instructions
Caution !
Assembly of the machine must only be carried out by appropriately trained technician.
Any operations to be performed on the electric installation of the sewing machine are to be done only by a compe-
tent electrician.
2. The way of machine supply
The contents of supply will be determined in agreement between the supplier and buyer. There are following possibilities:
2.1 Complete head with accessories
In this case the supply contains:
- Complete head.
- Chosen spare parts in the bag under the presser element (see parts indicated * in catalogue of spare parts).
- Standard accessories (it contains tools-see module in catalogue of spare parts).
- Special accessories (it contains some components of a stand and upper belt cover-see module in catalogue of spare
parts).
The supply like this is not complete. Buyer will provide missing components himself or he can put in an extra order to get
them according to the following paragraphs.
2.2 Stand
Delivery contains components of a stand, however, without components of a stand included in special accessories sup-
plied with machine head (see par.2.1) and without any electrical components.
If it hasn‘t been agreed otherwise, the stand is supplied in separate pieces. If the assembled stand is asked, special
accessories are used from head supply.
Stand (ordered number S400 010000) contains following items:
Equipment for foot lifting by treadle:
2.3 Motor
The supply contains its own motor, switch - circuit breaker, all cabling (except of the plug) and material for connection. It
can contain a control panel according to the type of motor. If it hasn‘t been agreed otherwise, it is supplied in separate
pieces. A machine without trimming is equipped with clutch lever motor. However if positioning is asked or electromagnetic
foot lifting or electromagnetic reverse stitching (bartacking) the machine without trimming must be equipped with stopmotor.
MG55 000501 Stand frame
MG53 002501 Big treadle
0907 021044 Set of parts for a stand
S615 000320 Table top
S522 000450 Small treadle
S980 060028 Foot lifting rod
www.promelectroavtomat.ru