14
ENGLISH
L2000651 Installation guide for DucoBox Silent (Revision N | 13.07.2020)
07.B
Checking
The steps set out below can be used to check whether flow rates have been set correctly�
Checking configured flow rate
1
The configured flow rate is dependent on whether the ‘HIGH’ or ‘LOW’ configura-
tion mode has been chosen�
Press for ‘HIGH’ configuration (= standard) or for ‘LOW’ configuration on a
random control to have the system run for 15 minutes at 100% of the requested
flow rate�
2
Measure the flow rate at the exhaust vents�
3
After the check, the system can be reset to the desired ventilation mode� If you do
not do so, the system will revert automatically to the AUTO mode after 15 minutes�
08
Maintenance & service
Please refer to the maintenance instructions at www.duco.eu and view the videos on duco.tv for more information�
For service problems as a user:
Please contact your installer� Keep the serial number of your product
to hand�
For service problems as an installer:
Please contact your Duco products seller� Keep the serial number of
your product to hand�
09
Warranty
All warranty conditions concerning the DucoBox and Duco's ventilation systems can be found on the Duco website�
All complaints are to be reported to Duco by the Duco distributor with a clear description and the order/invoice number under
which the products were delivered� In order to register the complaint, please use the complaint registration form found on the Duco
website and the product's serial number in your message to service@duco�eu�
Sticker inside the DucoBox
