Ducati Multistrada 1200S ABS, Руководство пользователя

Страница: 97 / 206

96
E
PIN CODE change function
This function changes your four number PIN CODE.
To display the function, enter the “setting” menu page 50
and access the “PIN CODE” page.
Note
If “NEW PIN” and the dashes “- - - -” appear when
accessing this function, this means that the function was not
active as the PIN CODE was never entered. Enter your PIN
as described in the previous paragraph “PIN CODE activation
function”.
When accessing the function, “MODIFY” will appear on the
circular display (B, fig. 7); press the reset button (14, fig. 5)
showing “MODIFY” to modify the PIN.
Note
To change the PIN, you must know the currently stored
PIN.
“OLD PIN” and four dashes “- - - -” will appear on the circular
display (B, fig. 7); enter the old 4 digit code that was stored
previously.
Entering the “old” PIN: each time you press the button (2,
fig. 8) “
▼
” the displayed number increases from “0” to “9”
and then returns to “0”;
To confirm the number, press the reset button (14, fig. 5);
repeat the procedure until inserting the fourth digit;
Press the reset button (14, fig. 5) again to confirm.
“OK” and “EXIT” will appear on the display.
To confirm the ”old” PIN that was entered, press the reset
button (14, fig. 5) again showing “OK”.
If the code is not correct, “OLD PIN WRONG” will appear for
3 seconds and then the instrument panel will return
displaying “MODIFY” so you can repeat the attempt of
entering the ”old” code.