![background image](http://html.mh-extra.com/html/ducati/monster-s4r-s/monster-s4r-s_use-and-maintenance-manual_2537695054.webp)
54
E
Lubricating cables and joints
(fig. 51)
The condition of the throttle cable sheaths should be
checked at regular intervals. There should be no signs of
pinching or cracking on the outer plastic sheath. Operate
the control to check that the inner cable slides smoothly:
if you feel any rubbing or catching, have the cable replaced
by a Ducati Dealer or Authorized Service Centre.
To prevent problems, periodically lubricate the ends of each
control cable with SHELL Advance Grease or Retinax LX2.
In the case of the throttle cable, open the twistgrip housing
by unscrewing the two screws (1) and grease the end of
the cable and the race.
Warning
Close the twistgrip housing carefully, inserting the
cable in the race.
Refit the housing and tighten the screws (1) to 1.8 Nm.
To ensure smooth operation of the pivot on the sidestand,
remove any dirt and apply SHELL Alvania R3 to all points
subject to friction.
1
fig. 51