57
E
Replacing bulbs
Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in the
“Electrical System” for that lighting device at page 78.
Headlight
(fig. 54)
To facilitate access to the headlight for servicing, remove
the headlight shell as explained in “Removing the headlight
shell” (page 48).
To access the headlight bulbs, unscrew the lower screw (1)
securing the lens/reflector assembly to the headlight body.
Disconnect the wiring connector (2, fig. 55) from the headlight
bulb. Release the bulb retaining clip (3, fig. 55) and remove the
bulb from its housing.
1
fig. 54
2
3
fig. 55