Ducati MONSTER 2022 Скачать руководство пользователя страница 53

Страница: 53 / 240

Side stand

Important

The position of the side stand is identified on

the instrument panel by the warning light (A). When

the warning light is on, the side stand is lowered (and

the engine start is inhibited).

Attention

Before lowering the side stand, make sure that

the bearing surface is hard and flat.
Do not park on soft or pebbled ground or on asphalt

melt by the sun heat and similar or the motorcycle

may fall over.

When parking downhill, always position the

motorcycle with the rear wheel facing downhill. To

pull down the side stand, hold the motorcycle

handlebars with both hands and push down on the

side stand (1) with your foot until it is fully extended.

Tilt the motorcycle until the side stand is resting on

the ground.

Attention

Do not sit on the motorcycle when it is

supported on the side stand.

rpm X1000

SPORT

10:34

Air

°C

100

°C

Setting menu

Total

1229

DQS
DTC
ABS
DWC

Off

Fig 33

Fig 34

Содержание MONSTER 2022

















































































































































































































































Результаты поиска

Содержание MONSTER 2022

Отзывы:

Ducati MONSTER 2022, Руководство пользователя, Страница: 53 / 240

Результаты поиска

Содержание MONSTER 2022

Отзывы: