Ducati MONSTER 2022 Скачать руководство пользователя страница 111

Страница: 111 / 240

Changing the Riding Mode

●

Press and hold the MODE/ENTER button (3) for

a long time.

●

The dedicated screen is displayed (Fig 78) where,

using buttons (1) and (2), it is possible to scroll

through the available Riding Modes and display

the parameters with the relevant set values.

●

Press the MODE/ENTER button (3) to confirm.

Select "Exit" and press MODE/ENTER button (3) to

quit the screen without making any changes.
As soon as the new Riding Mode is confirmed, the

instrument panel checks the following conditions:

●

If speed is lower than or equal to 5 km/h (3 mph)

and throttle control is open, the message “Close

throttle” is displayed; the new Riding Mode is

confirmed and stored only when throttle control

is closed and then the main screen is displayed.

●

If speed is lower than or equal to 5 km/h (3 mph),

throttle control is closed but brakes are

actuated, the message “Release brakes” is

displayed. The new Riding Mode is confirmed

and stored only when brakes are released and

then the main screen is displayed.

Fig 77

Fig 78

110

Содержание MONSTER 2022

















































































































































































































































Результаты поиска

Содержание MONSTER 2022

Отзывы:

Ducati MONSTER 2022, Руководство пользователя, Страница: 111 / 240

Результаты поиска

Содержание MONSTER 2022

Отзывы: