Ducati MONSTER 2022 Скачать руководство пользователя страница 180

Страница: 180 / 240

Check clutch and brake fluid

Check the brake and clutch fluid level with the

vehicle in a vertical position and on a flat surface.

The levels should not fall below the MIN notch on

the respective front brake (1), rear brake (2) and

clutch (3) reservoirs.

If level drops below the limit, air might get into the

circuit and affect the operation of the system

involved.

Brake and clutch fluid must be topped up and

changed at the intervals specified in the scheduled

maintenance chart under “Scheduled maintenance”;

please contact a Ducati Dealer or Authorised Service

Centre.
Brake system

If you find exceeding clearance on brake lever or

pedal and brake pads are still in good condition,

contact your Ducati Dealer or authorised Service

Centre to have the system inspected and any air

drained out of the circuit.

MAX

MIN

MAX

Fig 162

MIN

MAX

Fig 163

179

Содержание MONSTER 2022

















































































































































































































































Результаты поиска

Содержание MONSTER 2022

Отзывы:

Ducati MONSTER 2022, Руководство пользователя, Страница: 180 / 240

Результаты поиска

Содержание MONSTER 2022

Отзывы: