manualshive.com logo in svg

Ducati HYPERMOTARD 939, Руководство пользователя

Поделиться
Скачать
Ducati HYPERMOTARD 939 Скачать руководство пользователя страница 77

To customise the parameters, to select the riding

mode to change and press button (4).

The parameters that can be customised are DTC

(Ducati Traction Control), ABS (Antilock Braking

System), ENGINE (engine power).

With buttons (1) and (2) it is possible to select the

parameter to be customised.

Any parameter change (personalisation) made is

saved and remains in the memory also after a Battery-

Off.

It is furthermore possible to reset the parameters of

a single riding mode with the DEFAULT function.

Note

On the right side of the DEFAULT item, a

symbol indicates that the active settings are the

default ones, and so the parameters are those set by

Ducati.

Warning

Changes should only be made to the

parameters by people who are experts in motorcycle

set-up; if the parameters are changed accidentally,

use the "DEFAULT" function to restore factory

settings.

76

Содержание HYPERMOTARD 939


























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды