46
Owner’s manual
English
DBC 4600
• Installing blade guard. Open the blade
guard and install on the blade, then put the
pin into the guard notch.
Always place the blade guard on the blade
when the unit is not in use.
Remove the blade guard before using the
unit. If not removed, the blade guard could
become a thrown object as the blade begins
to turn.
Please empty the fuel tank before
transporting, to avoid the engine leaked.
For avoiding the cutting attachment damaged
the brush cutter and people. Please removed
the cutting attachment and at the same time
resile the brush cutter as factory state and
then casting all parts into the package.
Before transporting all parts should be
packed and validated safe.
Storage
• Inspect, clean and repair unit if necessary.
• Remove all fuel from tank.
• Start engine-this will consume all fuel in
fuelline and carburetor.
• Remove spark plug and pour one tea spoon
of clean motor oil into spark plug hole of
cylinder-replace spark plug.
• Store in clean, dry, dust free area.
Do not store in a closed are a where fuel
vapors can rcach an open flame frorn hot
water heaters, heaters, furnaces. etc. Store in
a locked well ventilated area only.
Bevel gear
After working (40-50) hours, fill with the right
quantity of grease. Remove the screw and put
in the lithium-based grease. Turning the shaft
manually until grease emerges, then refit the
wash the screw.
Adjusting carburetor note
Do not adjust carburetor unless necessary.
If you have trouble with the carburetor, see
your dealer. Improper adjustment may cause
engine damage and void warranty.
15. TRANSPORT AND STORAGE
Transport
• The engine should be turned off when the
unit is moved between work areas.
• After the engine has stopped .the muffler is
still hot. Never touch hot parts such as the
muffler.
• Confirm that the fuel has not leaked from
the tank.
• Allow the engine to cool; empty the fuel tank
and secure the unit from moving before
transporting in a vehicle, if the blade is fitted
, always use the blade guardo
Содержание DBC 4600R
