Ducati DBC 4600R, Руководство пользователя

Страница: 31 / 52

31
English
Owner’s manual
DBC 4600
• Keep hands and feet clear of the nylon
cutting head while unit is in use.
• Do not use this type of machine for
sweeping away debris.
• Do not use the unit when you are tired, ill
or under the influence of medication, drugs
or alcohol.
• Use nylon cutting head which is free of
damage. If a stone or any other obstacle
is hit, stop the engine and check the nylon
cutting head. A broken or unbalanced
nylon cutting head must never be used.
• Do not store in a closed area where fuel
vapors can reach an open flame from hot
water heaters, heaters, furnaces, etc.
Store in a locked, well ventilated area only.
• Ensure safe and proper performance of
your product. These part are available
from your dealer. The use of any other
accessories or attachments may cause
a potential hazard or injury to the user,
damage to the machine and void this
warranty.
• Clean the machine completely, especially,
the fuel tank, its surroundings, and the air
cleaner.
• When refueling, be sure to stop the engine
and confirm that it is cooled down. Never
refuel when the engine is running or hot.
When gasoline spills, be sure to wipe it up
completely and properly dispose of those
materials before starting the engine.
• Stay clear of other workers or bystanders
by at least 15 meters /50 feet.
• When ever approaching an operator of
the machine, carefully call his attention
and confirm that the operator stops the
engine. Be careful not to startle or distract
the operator which can cause an unsafe
situation.
• Never touch the nylon cutting head when
codes and ordinances for such usage.
• Never remove the fuel tank cap while the
engine is running.
• Never start or run the engine inside a
closed room or building. Fumes from
the exhaust contain dangerous carbon
monoxide.
• Never attempt to make engine adjustments
while the unit is running and strapped
to the operator. Always make engine
adjustments with the unit resting on a flat,
clear surface.
• Do not pull off the cable.
• Do not lift the machine other than by the
handle of the shaft.
• Do not rest the machine on the ground
while the engine runs (e.g.in idling).
• Regular check for damages, failing of
parts, component or cables. Do not use
the unit if it is damaged or poorly adjusted.
Never remove the machine’s guard.
Serious injury to the operator or bystanders
could occur as well as damage to the
machine.
• Inspect the area to be cut and remove all
debris that could become entangled in
the nylon cutting head. Also remove any
objects that the unit may throw during
cutting.
• Keep children away. Onlookers should be
kept at a safe distance from the work area,
at least 15 METER (50 FEET).
• Never leave the machine unattended.
• Do not use this unit for any job other than
those for which it is intended as described
in this manual.
• Do not overreach. Keep proper footing and
balance at all times. Do not run the unit
while standing on a ladder or on any other
unstable footing location.