Page 15
An unlocking system is provided to unlock the trolley and move the door manually. Composed by an iron
wrap with his sheath, it must be connected to the unlocking undle positioned on the trolley.
Pass the iron wrap inside the hole of the handle and slide it into the sheath (Draw.34) then pass the iron
wrap and sheath into the door fixing plate (Draw.36)
Fix the iron wrap on the handle of your door using the supplied wrap-compressor (Draw.37-38).
To unlock the gate
from inside or utside rotate the door handle anti-clockwise (Draw.38).
To lock the trolley,
moove manually the door until the belt securing plate fits again in the trolley ( it will
happen automatically while mooving the door.
WARNING: to control the door with your radio remote control, the trolley must be locked!
7. Manual release system
Once the opener has been
installed, tighten the belt by
means of the belt tightener as is
showed in draw.33 so that the
belt does not swing excessively
during movement. Do not over
tighten the belt.
8° step:
belt tightener
Draw.33
turn the nut to tight the belt
WARNING:
for installation on a
projecting up-and-over door,
an extra canopy arm (not supplied inside the kit) is
needed to connect the trolley to the door) as in draw.
32/B.
Please see also page 6 point 3.3.
.
Please refear to the specific intruction manuals sup-
plied with the canopy arm to be separately purchased.
door
fixing
plate
iron wrap
sheath
Draw.36
Draw.35
iron
wrap
sheath
Draw.34
trolley
CANOPY ARM
# 992012
standard door braket
Draw.32/ B
