Level unit using the adjustable feet under the unit (approximately 1/2" adjustment).
Before using the unit for the first time, wipe down the exterior with a damp cloth.
CAUTION
Allow enough space around the toaster for adequate ventilation. Do not operate the unit
without the crumb tray properly positioned. Overheating and poor toasting may occur.
Read all labels on the unit and follow their instructions.
ELECTRICAL CONNECTION
WARNING
Before making any electrical connection to this unit, check that the power supply is
adequate for the voltage, amperage and requirements stated on the rating plate.
A wiring diagram is included herewith.
Disconnect the unit from the power source before installing or removing any parts.
Be absolutely sure that the earth connection for the receptacle is properly wired. Do not
connect equipment to power without proper earth connections. Improper grounding (earth)
may result in personal injury or fatality.
WARNING
DO NOT CUT OR REMOVE THIS PLUG OR GROUNDING (EARTH) PRONG
FROM THE PLUG.
WARNING
CONNECT/PLUG UNIT INTO DEDICATED A.C. LINE ONLY SPECIFIED ON THE
DATA PLATE OF THE UNIT.
DAILY OPERATION PROCEDURES
ROTARY POWER SAVER SWITCH
For toasters equipped with a Rotary Power Saver Switch, turn clockwise or
counterclockwise to get in the following positions.
FULL POWER
When in this position your equipment is at full power and ready to use.
OFF ROTARY
Two off positions are provided, a single rotation to either direction will shut the unit off.
STANDBY
The standby position reduces the power consumption by 75%. Using this position during the
quiet times will save electricity, and keep the toaster warm. When needed, turn the switch
to FULL POWER. Recovery time is about 30 seconds.
CAUTION
CERTAIN SURFACES ARE EXTREMELY HOT DURING OPERATION AND CARE
SHOULD BE TAKEN WHILE USING THIS UNIT.
