Dual Pumps SprayWash SW116PHR Скачать руководство пользователя страница 3

1. Safety Information

Warning - Engines produce fumes and toxic gases.

Only operate outdoors or in a sufficiently well ventilated area.

Warning – Fuel vapours are flammable.

Allow unit to cool before refuelling at a safe distance from naked flames, ignition 
sources & heat. Refer to engine manufacturer’s manual.

Warning – Washers can cause harm to people, animals & 
property.

They should only be used by properly trained operators wearing suitable protective 
eyewear, clothing, and non-slip footwear and in a safe, open environment.

Warning – Poorly maintained components can lead to 
injury.

Before every period of use ensure the Washer is in good working order.  All loose 
connections should be tightened and worn or damaged components should be 
replaced before use.

Warning – The Washer is performance set at factory.

Do not adjust the engine governor or Washer valves unless qualified to do so. Over 
loading of engine and components can lead to equipment failure, personal injury 
and will void the warranty.

Warning – Damage to Washer can occur if left running.

Do not leave the Washer running in bypass for extended periods as heat build-up 
can damage the pump. Do not leave unit running unattended.

Warning – Never pump flammable or explosive liquids.

The Washer must only be used with liquids compatible with the pump, component & 
accessories.

Warning – Chemicals can damage the pump and components.

The Washer must be flushed through with clean water after every period of use as 
chemicals and detergents can corrode the components.

THE MANUFACTURER CANNOT BE HELD RESPONSIBLE FOR ANY HARM 
OR DAMAGE CAUSED BY DISREGARDING THE DESIGNATED USES OF THIS 
MACHINE, ITS INSTRUCTIONS AND WARNINGS INDICATED IN THIS BOOKLET.

!

!

!

!

!

!

!

1

!

Содержание SprayWash SW116PHR

















Отзывы: