WFPF3800
6
V4.2L
STEP
5
Hang the Filter System Head
1
Align the System Head
A
on the pipes so that the inlet and outlet are in the correct locations. The “in” port on the Filter System should
be facing the incoming water supply.
2
Allow the System Head to temporarily hang between the two cut plumbing pipes.
3
Apply plumber’s tape or appropriate sealant to the fittings and lines, according to your system configuration.
4
Make all connections and tighten fittings.
NOTE: Keep the Filter System in an upright position.
A grounding kit (not included) must be installed on water pipes if they are used to ground electrical systems, appliances or phones.
CAUTION
STEP
6
Install the Filter Housing
1
Insert the Filter Cartridge
C
over standpipe in the bottom of the Filter Housing
A
.
2
Screw the Filter Housing back onto the System Head and hand-tighten
D
.
IMPORTANT: Do not over tighten.
GROUNDING KIT (NOT INCLUDED)
5
3
IN
OUT
WATER
FLOW
TO
HOUSE
A
6
A
C
D
