Du Pont Cyrel FAST 2000TD, Руководство по эксплуатации

Страница: 29 / 106

Operation procedures
2-11
Ejecting plates
Stack light signals for plate ejection
In normal, automatic mode the plate will be processed according to the program which has been selected.
Once the defined number of cycles have been completed the eject procedure automatically starts.
The multi-colored stack light provides a visual indication of the processor's current status when ejecting a
plate:
Color
Plate ejection
mode
Behaviour/Action Button
If set up for
AUTOMATIC
plate ejection: 1. The front edge of the plate will automatically be
released and exit the processor during the exit
slot.
At the same time the stack light switches from
yellow to blue.
2. Press the 'Eject' button to release the plate from
the rear clamp arm.
The stack light turns back to yellow .
3. At the same time, grab the plate to avoid it
dropping on the floor.
When the plate has been released, the stack
light turns green, and the processor is ready for
processing the next plate.
If set up for
MANUAL
plate ejection: 1. The plate is still rotating inside the processor,
fixed to both clamp arms.
The stack light is blue .
2. Press the 'Eject' button to start releasing the
plate from both clamp arms and eject the plate.
The stack light turns solid yellow .
3. Grab the plate when it exits the processor, to
avoid it dropping on the floor.
When the plate has been released, the stack
light turns green, and the processor is ready for
processing the next plate.
January, 2020 Operation Manual | Cyrel FAST 2000TD