DTS X BRICK, Руководство пользователя, Страница: 25 / 39

User Manual Ver. 1.04 23 di 35
X BRICK
X BRIK PI and X BRIK PI Wireless
In permanent installations IP 65, use Cable–Cable junction also for DMX.
Available on request: Permanent installation kit IP68: Power IN IP68 cable con 2 x DMX IN/OUT IP68
cable connectors (code 03.LA.214)
12.1 DMX terminator
The use of a DMX terminator is recommended.
The DMX terminator is a male XLR 5 pins connector with a 120 Ω resistor between pin 2 and pin 3.
The DMX terminator must be plugged in into the last unit’s DMX OUT panel connector of the DMX line.
Place a 120 Ω resistor between pin 2 and 3 of a male XRL
connector;
Plug the resistor into the DMX OUT panel connector of the last unit
connected to the DMX line.
12.2 DMX Modes
X-BRICK can be used in nine different DMX modes:
Full operation modes

“Chase” (23 ch) (Default)

“Extended” (29 ch)

“Sectors RGBW x4” (16 ch)

“Sectors RGBW fine x4” (32 ch)

“Sectors RGBW+Shut+Dim x4” (24 ch)
DMX single layer modes (compatible with all BRICK and MINI BRICK DMX modes)

“Standard” (10 ch)

“Global RGBW” (4 ch)

“Global RGBW+Shut+Dim” (6 ch)