DTS X BRICK, Руководство пользователя, Страница: 15 / 39

User Manual Ver. 1.04 13 di 35
X BRICK
8.3 Safety Cable
A safety cable must be securely fixed to X-BRICK and to the suspension truss in order to avoid
the fixture accidentally falling, should the main fixing point fail.
The safety cable used must be approved by a notified body according to IEC 60598-2-17 and
must be capable of bearing at least 10 times the weight of the unit. For more information,
please refer to an authorized DTS service center.
A suitable safety cable (code 0521A038) is available on demand.
You may attach the safety cable to the attachment point (A) located at the back of the X-BRICK, as shown in
the picture below.
8.4 Display UV Protection
For outdoor installations, X-BRICK is provided with a “Display UV Protection” kit (code 03.LA.218).
To properly install the protective device, put in place the Display UV Protection plate and the gasket over the
display panel. Fix them both with the two screws (marked in red) provided with the kit.
Fix the safety cable on the side cap with the screw and washer (marked in green) provided with the kit.
A