SLICE PRO Ethernet Controller User’s Manual
May 2019
7
13000-30610-MAN (Rev. 5)
LED Indicators
There are two LED indicators. The status LED indicates communication and arm status and
the power LED indicates power status. LED behavior is summarized below.
State
Idle or no power input
Armed in Recorder mode and waiting for Start Record signal to begin data collection
Recording; status line low
Recording; status line high
Communicating with PC (not armed)
Firmware version A1B6 or higher
Battery Charge
Status
1
Power up
. . . . .
OFF
ON
Charging
(0.4 Hz)
Discharging
(1 Hz)
>90%
50% - <90%
20% - <50%
<20% or FAULT
Firmware version A1B2 or lower
ON
OFF
Power up
Connected to external power and unit is charging (power OK)
1
Connected to external power and unit is charging (power OK)
1
Connected to external power and unit has fully charged
1
Battery low
1
Connected to external power; power fault
1
SLICE PRO LAB systems do not contain internal batteries and must be connected to external power at all times.
Содержание SLICE PRO
Страница 21: ......