DTS SLICE PRO, Руководство пользователя, Страница: 14 / 22

SLICE PRO Ethernet Controller User’s Manual
May 2019
support.dtsweb.com
14
13000-30610-MAN (Rev. 5)
Appendix A: Connector Information
19-pin COM connectors 4-pin POWER connector
(EEG.2B.319.CLL) (EEG.2B.304.CLL)
Suggested cable connector P/N: Suggested cable connector P/N:
FGG.2B.319.CLADxx* FGG.2B.304.CLADxx*
Pin Function Pin Function
1 Internal function only 1 9-15 VDC input
2 Internal function only 2 - VDC input/Ground
3 Shield 3, 4 Ground
4 Start recording input, optically coupled
(apply 5 V with respect to pin 16)
DOWN
(Omnetics A98000-015)
(panel view)
5 Common
6 Status output, 5 V via 110 ohm
(referenced to common)
7 (+) Status input, optically coupled
8 Ethernet Tx2 (-)
9 Ethernet Tx2 (+) 1, 2 12.2 VDC out
10 Remote ON, CC to pin 5** 3, 4 Ground
11 Ethernet Rx3 (-) 5 /ON, CC input to ground
12 Ethernet Rx3 (+) 6 /EVENT, CC input to ground
13 Ethernet Tx3 (-) 7 /START, CC input to ground
14 Ethernet Tx3 (+) 8 Status output (5 V via 10k
15 + Event, rack-to-rack; CC to pin 19 with respect to ground)
16 (-) Common for start record and status
inputs 9, 10
11, 12
12.2 VDC out
Ground
17 Ethernet Rx2 (-) 13 USB_DP
18 Ethernet Rx2 (+) 14 USB_DM
19 - Event, rack-to-rack; CC to pin 15 15 USB power
* xx denotes diameter of cable to be used; e.g., 52 = 5.2 mm. See www.lemo.com for more information.
** A small number of early units do not have this feature. See page 5 for more information.
1
2
3
11
12
4
5
6
7
8
9
10
13
14
15 16 17
18
19
(panel view)
1
2 3
4
(panel view)
8 1
9 15