SLICE PRO Ethernet Controller User’s Manual
May 2019
4
13000-30610-MAN (Rev. 5)
Introducing the SLICE PRO Ethernet Controller
The SLICE PRO Ethernet Controller is a communications and signal interface for a SLICE
PRO system. It supports event, start record and status signals, and is compatible with all
SLICE PRO and TDAS COM connectors. It supports up to 4 SLICE PRO modules, including
the SLICE PRO SIM.
•
Shock hardened to 100 g for dynamic testing environments (crashworthy version only).
•
Ethernet 10/100BaseT/Tx supports daisy-chained systems up to 500 channels.
•
Internal battery with 1 hour capacity functions as primary or back-up power
(crashworthy version only).
•
LED indicators for power and system status.
•
Primary system input power via the power input connector is protected against reverse
current, over-current, and limited transient over-voltage conditions.
•
Compatible with SLICE PRO and TDAS equipment via the COM connectors.
Control Panel
The two 19-pin COM connectors are functionally identical and allow access to all
communication features and signal lines. The PWR connector supports primary system input
power and the ON power switch will power up or power down the system. See Appendix A
for connector information and pin assignments. Mechanical specifications are included in
Appendix B. Appendix C discusses the network parameters of your equipment.
SLICE PRO
SLICE PRO LAB
(crashworthy)
(stationary)
COM A
and
COM B
- Functionally identical
- To PC via REC cable (P/N 10700-0015x)
- Supports Ethernet 10/100BaseT/Tx,
event input, remote on, start record input
and status signals
- Compatible with all TDAS and SLICE PRO
COM connectors
EVENT
- Dedicated event input on SLICE PRO LAB
ON
power switch
- Cycles power ON/OFF
- Momentary; firmly press and hold for 2 sec
PWR
power input connector
STS
and
PWR LEDs
(images not to scale)
Содержание SLICE PRO
Страница 21: ......