19
13- DISPLAY FUNCTIONS
WIRELESS
WIRELESS DMX
Wieless DMX enabled / disabled.
By activating WDMX MODE, it will
be possible to control NICK NRG
1200 CT via D.T.S. ANTENNA
Wireless DMX Transmitter (cod.
03.E1271).
Wireless DMX Receiver Kit
(Cod. 03.LA.126) on NICK NRG
1200 CT is available on request.
Logging on NICK NRG 1200 CT (WIRELESS DMX must be enabled on the unit).
To log on the NICK NRG 1200 CT in the WIRELESS system simply press and quickly release the
function button on the transmitter .
The transmitter will start flashing rapidly red/green scanning for new free receivers / NICK NRG 1200
CT units. When a NICK NRG 1200 CT logs on to the transmitter the LINK green light on transmitter
starts to flash rapidly.
After approximately 10 seconds the transmitter will jump back to normal mode and continue transmitting
data. The NICK NRG 1200 CT now try to synchronize to the transmitter.
When synchronized to the transmitter, 2 different modes are possible:
1. Antenna transmitter has detected and transmits a DMX signal, in this mode a solid green light is seen
on the transmitter and solid display is seen on NICK NRG 1200 CT.
2. No DMX signal connected, the Antenna transmitter will flash red/green; display blinking on NICK
NRG 1200 CT.
To log off NICK NRG 1200 CT from a transmitter simply select UNLINK function under WIRELESS
DMX MENU and press ENTER.
When NICK NRG 1200 CT is logged off the display is blinking, meaning its available for log in on a new
transmitter.
Logging out a NICK NRG 1200 CT.
Select UNLINK function under WIRELESS DMX MENU and press ENTER.
When NICK NRG 1200 CT is logged off the display is blinking, meaning its available for log in on a new
transmitter.
Logging out all NICK NRG 1200 CT linked to a transmitter.
Press and hold the function button of the transmitter for about 3 seconds. When the display is blinking
on NICK NRG 1200 CT, it mean that the units are logged out.
Transmitter, Status LED.
Flashing red/green, no dmx connected.
Solid green, dmx signal detected and transmitted.
Fast flashing red/green, log in mode (every free NICK NRG 1200 CT unit, not logged in to any other
transmitter, will be logged on)
NICK NRG 1200 CT Status.
Display blinking, not logged on to a transmitter (free).
Solid display, logged on to a transmitter and receiving dmx data.
MENU ENTER DOWN
UP
20 ch
DMX SET
DMX MODE
MENU ENTER DOWN
UP
WIRELESS
UNLINK
20 ch
DMX SET
DMX MODE
OFF
WIRELESS
SELECTION
MENU ENTER DOWN
UP
MENU ENTER DOWN
UP
20 ch
DMX SET
DMX MODE
ON
WIRELESS
SELECTION
MENU ENTER DOWN
UP
MENU ENTER DOWN
UP
Up-Down
Menu
Up-Down
ENTER
ENTER
ENTER
ENTER
WIRELESS DMX SYSTEM
DISABLED (Default)
WIRELESS DMX SYSTEM
ENABLED
UNLINK = LOG OUT
