20
2.2.5 High Speed UART Baud Rate Setting
If your programmer is not NET IMPRESS next, and you want to use UART baud rate higher
than 115200bps, change the setting by following the steps below.
You can set baud rate higher than 115200bps with [FUNC D2] by using NET IMPRESS next as
well as when you set baud rate lower than 115200bps.
Select baud rate with baud rate setting function shown as below.
After operating above keys, select a baud rate by using
and
.
After selecting baud rate,
operate the above keys, and the setting is completed.
Please note some baud rate that cannot communicate depending on the clock peripheral
microcomputer.
If you set the not connectable baud rate, “112D UART BAUDRATE SETTING ERR” is
displayed when executing the device function.
8
1
FUNC
FUNC
SET
SET
