dtm slimflash, Руководство пользователя

Страница: 21 / 28

21
3.2. Principles of installation of lamps with signaling and lighting functions
The photocell has built-in LED lamps that perform the signaling function in the version with an
orange shade or the lighting function in the version with a transparent shade.
Signal lamp with orange lampshade
The signal lamp fulfills its task when it is installed in a place from which it is clearly visible to
people in the automation work area. Placing the lamps on the border of the door's light width,
apart from the standard warning function, indicates the entry point in conditions of limited
visibility.
Lighting lamp with a transparent lampshade
Photocell lamps with a transparent shade perform the lighting function. Placing lamps on the
border of the gate light illuminates the driveway in conditions of limited visibility. It is possible
to connect a twilight sensor, thanks to which the driveway will be illuminated only after dusk.
The twilight sensor should be placed in a place with permanent access to natural daylight,
outside the range of the signal lamp lighting. Changes in the intensity of natural light will cause
the lamps to turn on and off.
Fig. 3
An example of the installation of photocell lamps.
Fig. 2
Exemplary location
of the transmitter in relation to the receiver.
transmitter
TX
recevier
RX
LED
modules
max 15 m
min 1m
indication of the gate entry
/ driveway lighting
transmitter
TX
receiver
RX
EN