DTK PRM-92V, Руководство пользователя

Страница: 41 / 52

Award BIOS Setup Guide
35
as “EPP” or “ECP+EPP” option.
4.11 SUPERVISOR PASSWORD
Two level of password is supported. Depending on the setting of the “Security
Option” in the “BIOS FEATURES SETUP”, the system BIOS will ask for
password every time booting up the System or entering BIOS Setup. With the
supervisor password, both the system booting and BIOS setup changing is allowed.
This main menu item lets the user to set up the Supervisor Password.
Change the password as follows:
1. Choose “PASSWORD SETTING” in the Main Menu and press <Enter>. The
following message appears:
“ENTER PASSWORD:”
2. Enter the Password and press <Enter>. The following message appears:
"CONFIRM PASSWORD:"
Important: Keep a safe record of the new password. If forget or lose the
password, the only way to access the system is to disconnect the
CMOS batteries and then re-enter the password.
4.12 USER PASSWORD
With the user password, only booting up the system is accepted, but changing the
BIOS setup is not allowed.
4.13 IDE HDD AUTO DETECTION
When users can not find the Hard Disk information, it is very helpful to use this
option.
1. Choose this item and press <Enter>.
2. After couple seconds, the screen will appear the Hard Disk information
and following message:
“SELECT PRIMARY MASTER OPTION(N=SKIP): N”