Award BIOS Setup Guide
33
increment
CPU Ratio:
You may choose the CPU ratio from “x2” to “x8”.
CPU Frequency:
You can choose the CPU bus frequency from “66MHz” to “155MHz”.
4.10
INTEGRATED PERIPHERALS SETUP MENU
The Integrated Peripherals setup option is used to change the values of the I/O
chipset registers for I/O functions.
ROM PCI/ISA BIOS (2A6LGD1D)
INTEGRATED PERIPHERALS
AWARD SOFTWARE, INC.
OnChip IDE Channel0
OnChip IDE Channel1
IDE Prefetch Mode
Primary Master PIO
Primary Slave PIO
Secondary Master PIO
Secondary Slave PIO
Primary Master UDMA
Primary Slave UDMA
Secondary Master UDMA
Secondary Slave UDMA
Init Display First
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
: Enabled
: Enabled
: Enabled
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: Auto
: AGP
: Enabled
: Auto
: Auto
Onboard Parallel Mode
Parallel Port EPP Type
ECP Mode Use DMA
Onboard Legacy Audio
Sound Blaster
SB I/O Base Address
SB IRQ Select
SB DMA Select
MPU- 401
MPU- 401 I/O Address
FM Port (388-38H)
Game Port (200-207H)
: ECP/EPP
: EPP1.7
: 3
: Enabled
: Disabled
: 220H
: IRQ5
: DMA1
: Disabled
: 330-333H
: Disabled
: Enabled
UART 2 Mode
IR Function Duplex
TX,RX inverting enable
Onboard Parallel Port
: HPSIR
: Half
: No
: 378/IRQ7
ESC: Quit
↑ ↓ →
←
: Select Item
F1: Help
PU/PD/+/-: Modify
F5: Old Values
(Shift)F2: Color
F6: Load BIOS Defaults
F7: Load Setup Defaults
Fig. 26
A short description of the screen items follows:
OnChip IDE Channel0/OnChip IDE Channel1: These items are used to enable or disable
the onboard IDE Channel.
IDE Prefetch Mode: Choose Enabled to set the onboard IDE controller to access the IDE
device with faster Prefetch Mode.
Primary Master PIO/Primary Slave PIO/Secondary Master PIO/Secondary Slave PIO:
Available selection are “Auto”, “Mode 0”, “Mode 1”, “Mode 2”, “Mode 3” and “Mode 4”.
To choose “Auto”, the system BIOS will scan the IDE device and decide which mode of the
Содержание PRM-92V
