DTK PRM-92V, Руководство пользователя

Страница: 37 / 52

Award BIOS Setup Guide
31
the boot and Plug and Play compatible device. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the BIOS automatically assigns them.
Reset Configuration Data: If enable this option, the BIOS will clear and reset the ESCD
after hardware reset.
IRQ#/DMA# assigned to: These items will be shown only when “Resources Controlled By”
option is set the “Manual”. The available options are “Legacy ISA” and “PCI/ISA PnP”. If
the option is set to “Legacy ISA”, the BIOS will never assign the specified IRQ/DMA
resource to PCI or ISA PnP Devices. If “PCI/ISA PnP” is chosen, the BIOS will make the
specified IRQ/DMA have a chance to be assigned to the PCI or ISA PnP devices.
CPU to PCI Write Buffer: It is used to enable or disable the CPU to PCI Write Buffer.
PCI Dynamic Bursting: It is used to enable or disable the PCI dynamic bursting cycles.
PCI Master 0 WS Write: Choose Enabled to let the PCI Master using 0 wait state in write
cycle.
PCI Peer Concurrency: Choose Enabled or Disabled. To enable this option will let the
system active more than one PCI device at a time.
PCI Delay Transaction: Select Enabled to use the write buffer for the delay transaction
cycles. It is selected to support the compliance of PCI Specification Version 2.1.
PCI Master Read Caching: Choose Enabled or Disabled. It is used to enable or disable the
PCI master read caching.
AGP Master 1 WS Write/AGP Master 1 WS Read: These items are used to enable or
disable the AGP master device 1 wait state Write and Read cycle correspondingly.
Assign IRQ For USB: It is used to choose the IRQ that the USB is used.
Assign IRQ For VGA: It is used to choose the IRQ that the VGA is used.