17
DYNertia3 Quick Start (Inertia- Chassis type)
Windows for Further Analysis of Saved Data
A brief over view of more complex analysis, read the main DYNertia3 manual for many more options and details.
Most Windows used for analysing saved data are in the menu option ’View’
Load the test runs you wish to analyse into the GRAPH Window
first using the trace set boxes as already explained.
Note:
Windows may only be relevant if the required data was collected e.g. Lambda deviation
Window is only valid if you are recording Lambda into a data channel.
Torque analysis- Area under curve, averages, peaks, stats Individual trace set- Detailed study of single Run data
Lambda/AFR deviation- How far from the target air fuel ratio Compare- Difference between Runs (smoothed)
Point to point- time to accelerate between RPM or speed points.
There are many more options for getting the most from your testing. You
can even export data directly into Excel to try out your own analysis
concepts.
