16
DYNertia3 Quick Start (Inertia- Chassis type)
Basic Analysis of Saved Data
Basic analysis using the main GRAPH Window; refer to the full DYNertia3 manual for details.
The main Graph Window can be used for overlaying and analysing data from test Runs.
To analyse a trace choose the trace of
interest by selecting it with the buttons
underneath the RPM/speed gauge and
then ‘Click’ on the Graph Window. The
coloured cursor (matches selected
trace) will indicate via the gauges the
values present.
‘Clicking’ in the graphs Right hand side
(where the scales are) will display the
‘floating’ data Window as shown to
reveal information for all the traces.
Holding the mouse over a data box will show that data Channels label (e.g. Exh Temp)
Tip-
Don’t forget you can ‘zoom’ in or out of the graph, use the “
” buttons in the lower graph corners.
‘Click’ on the “
?
” button in lower Left Hand graph corner displays a graph summary.
‘Double Clicking’ on any row in the graph
summary will bring up full information on that
trace (shown Right)
