8
TRANSMITTER PARTS & FUNCTIONS
Battery Cover (Back of Transmitter)
- Covers
battery and battery compartment. Held by 2 small
Phillips screws. Make sure battery is inserted
properly with +/- poles lined up with diagram. Do not
over-tighten the screws or you may crack the plastic.
Lanyard Connection
- Attachment point for lanyard.
Battery Installation Procedure
1. Make sure the Collar Unit is not on
the dog.
2. Remove the two screws holding the
Battery Cover with a small Phillips
screwdriver to remove the cover.
3. Remove the depleted battery.
4. Insert the new battery in the proper
direction, paying attention to
diagram in the battery
compartment.
5. Make sure the rubber seal is properly in place and
replace the Battery Cover and screws. Do not over
-tighten the screws as it may crack the plastic.
INSTALLING TRANSMITTER 9V BATTERY
The
K9 700
transmitter uses a 9-volt battery (not
included). We recommend using a name-brand
Lithium long life battery.
The Transmitter may not
operate properly with a generic brand battery
.
CAUTION -
Remove battery with prolonged storage of unit.