15
To Test the Electronic Stimulation:
1. Place the tester firmly on the contacts of
the Collar Receiver.
2. Set the intensity (note - an intensity level
setting of 4 or less might not be enough
to light the tester).
3. Push the N or C button.
4. The tester light will quickly flash once
when the N (Nick) button is pushed and light repeatedly
when the C (Continuous) button is pushed (the test light
will be brighter at higher intensity levels).
To Test the Vibration:
Press V button on the transmitter and the collar unit
will vibrate only.
Before testing, make sure that both units are fully
charged and the power to the Collar Receiver is “ON”.
Programming JUMP Levels & Testing Unit
SETTING THE JUMP LEVEL
1. Press and hold Button Jump button.
2. While holding Jump button, turn Intensity Dial to de-
sired Jump stimulation level. The LED will start flashing
to indicate that you are programming the Jump stimula-
tion level
3. Release Jump button. The LED will flash the number
of the new Jump level to confirm successful Jump level
programming. The Jump intensity setting will stay at
this level until a different Jump level is programmed.
Changing your normal intensity level will not affect the
Jump setting. When applying Jump stimulation, intensi-
ty level will return to its normal setting when the Jump
button is released.