7
Intensity Selection Dial
-
The Intensity
Selection
Dial
increases/decreases
the
stimulation level and can be set from levels 1-
16. For tips on finding the best E-Stim level
for your dog, (see
page 18
).
LED Indicator Light
- The LED lights up while
pressing any of the Transmitter buttons. The LED
flashes rapidly after pressing buttons if battery is low.
TRANSMITTER PARTS & FUNCTIONS
Compact Transmitter Antenna
- Always check that
the Antenna is securely fastened to the transmitter.
Hand tighten only. Use caution when attaching
Antenna as over-tightening may cause damage to
the Antenna or antenna mount.
Continuous (C) Stimulation Button
- Pressing this
button emits a continuous stimulation while the button is
being pressed (up to an 8 second safety cutoff).
Programming Mode Selector Dial
-
Switching between Training Modes can be
controlled by toggling the Programming Mode
Selector Dial to the desired set of Training
modes (N-C-V, C-J-V, or C-J1-J2)
Nick (N) Stimulation Button
- Pressing this button
makes the collar emit a quick, split-second stimulation.
Vibration (V) Button
- Pressing the Vibration Button
makes the collar vibrate only.
Jump (J) Button
-
Pressing Jump Button functions just
like Continuous button but Jump can be programmed to
any level from 1-16.
Magnet Indicator
- Red dot on Transmitter indicates
location of Collar Unit ON/OFF switch.