manualshive.com logo in svg

DT SWISS D 232, Техническое руководство

Поделиться
Скачать
DT SWISS D 232 Скачать руководство пользователя страница 4

4

1.5  DT SWISS MANUAL CONCEPT

The DT Swiss manuals are split into the following types of manuals:

• 

User Manual: Information for the end user on how to install and use the component.

• 

Technical Manual: Detailed information for the end user and the dealer on how to maintain the 

component, spare parts and technical data.

1.6  HOW TO USE THE MANUAL

The steps described in this manual must be carried out in the order they are shown. If steps are 

ignored or executed in a wrong order, the function of the component cannot be guaranteed.

 

Instructions begin with the table «Preparatory Steps» and end with the table «Closing Steps». The 

instructions in these tables must be carried out.

1.7  CROSS REFERENCES

In order to simplify the use of this manual, some text is edited as hypertext. After clicking you will be 

automatically redirected to the target of the reference.

 

If the text is formatted underlined, it is a cross-reference.

 

Example: Example: Click here:“1. General” on page 

3

 to jump to the beginning of this chapter.

1.8  GENERAL MAINTENANCE INFORMATION

Unless otherwise specified, moving parts, threads, O-rings and seals must be greased before 

assembly.

CLEANING

For an optimal result of the maintenance works, every component that will be disassembled must be 

cleaned. Only use cleaners which do not damage the components. Especially the cleaning of O-rings 

and sealings requires mild cleaners. Observe the instructions for use of the respective cleaner.
DT Swiss recommends the following cleaners:

•  Motorex Rex
• 

Motorex Swissclean

• 

Motorex OPAL 2400, 3000 OPAL, OPAL 5000

Use soapy water or similar mild cleaners for external cleaning.

TOOLS

To ensure a damage-free mounting and dismounting of the components, only use the tools which 

are mentioned in this manual. Special tools are indicated at the beginning of a chapter in the table 

"Required material".

 

The use of different tools is at the discretion of the user. If components are damaged by the usage of 

differing tools, the user is liable.
DT Swiss special tools are precision tools. Damage-free mounting and dismounting of the components 

can only be ensured if the tools are working properly and if the condition of the tools are perfect. 

Always keep the tools in their original packaging or adequate devices to prevent damage.

Содержание D 232










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды