manualshive.com logo in svg

DT SWISS D 232, Техническое руководство

Поделиться
Скачать
DT SWISS D 232 Скачать руководство пользователя страница 3

D 232 - Technical Manual V2020.05

3

1.  GENERAL

1.1  VALIDITY

This manual describes the component specified on the front page and the footer. This manual is 

valid for the design of the product as of 29.05.20. Deviations are possible and all items are subject to 

technical changes.

1.2  SAFETY

The safety and warning instructions are classified as follows:

DANGER

...indicates a hazardous situation that, if not avoided, will result in death or serious injury.

CAUTION

… indicates a hazard with a medium level of risk which, if not avoided, may result in minor or 

moderate injury.

NOTE

… indicates a potentially hazardous situation that may result in damage to property.

1.3  TARGET GROUP

This manual is intended for the user of the component and dealers. This manual offers the 

experienced user the possibility to carry out minor service work himself. If you have any doubts about 

your own abilities, you should definitely contact a specialist or a DT Swiss Service Center. 

 

Any warranty claims will lapse if work is not carried out properly.

1.4  LAYOUT

The cover page and the footing provide information about the type of product and manual as well as 

the version of the manual. The DT Swiss contact details can be found on the back. A list of all DT Swiss 

service centers can be found at www.dtswiss.com.
This manual is intended for being printed as an A5 booklet. Only print this manual if electronic usage is 

not possible.

Содержание D 232










































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды