11
10
Weatherproof Zoom
COLOR VIDEO CAMERA
9
COLOR VIDEO CAMERA
8
Weatherproof Zoom
4. Name and Function of Each Parts
①
Fixing Bolt for Sunvisor:
You can unfasten the bolt in order to fix mounting bracket above.
②
Photo Sensor
③
Sunvisor:
To reduce direct sunlight and protect the camera unit from rain
or snow in outdoor.
④
Front Body
⑦
Base Adapter
⑧
Base Adapter Fixing Bolt
⑨
Wall Mount Bracket
⑩
Bracket Supporter
⑤
Rear Body
⑥
Mounting Bracket Fixing Bolt:
Fix the camera main body to
bracket by wrench bolt.
③
①
⑩
⑨
②
⑤
⑥
⑧
④
⑦
⑧
5. Installation
Cable the VIDEO out to the monitor video in jack.
Weatherproof
IR LED Camera
Monitor
Intermediate
Video Receiver
End monitor
• As the connecting method varies with the instruments, refer to the
manual supplied with the instrument.
• Set the 75
Ω
/ Hi-Z selection switch as shown below if you have an
intermediate device.
• Connect the cable after power is turned off.
Weatherproof
IR LED Camera
Connecting to Monitor
#3
#4
Connecting to Power Supply
- The wire is non-polarized.
- Use AC 24V power source or DC 12V power source.
. AC 24V / DC 12V Power
Black
Yellow
④
Service Connector (Extra Video Out Connector)
This camera system includes a service connector that outputs
extra camera video signal. Use it at the installation site to set up
the field of view and focus the camera.
①
MENU Button
Used to access OSD menu mode or escape menu from mode.
②
TELE/WIDE Buttons
Used to choose the desired menu item.
It also moves the cursor up or down in the menu screen.
③
NEAR/FAR Buttons
Used to change the parameter of the selected menu item.
It also moves the cursor the left of right in the menu screen.
. Rear Body
#1
#2
#3
#4
#5
#6
Line Color
No.
Function
#1
RED
DC12V/AC24V(H)
ORANGE
GND/AC24V(N)
#3
BLACK
GND(VIDEO)
YELLOW
VIDEO OUT
#5
#2
#4
#6
GREEN
RS-485 (+)
BROWN
RS-485 (-)
VIDEO
④
TELE
WIDE
NEAR
FAR
M
EN
U
③
②
①
③
②
