8. Menu Format
9. Menu Format Table
19
COLOR VIDEO CAMERA
18
Weatherproof Zoom
17
COLOR VIDEO CAMERA
16
Weatherproof Zoom
7. On-Screen Display
The OSD (On Screen Display) is as follows:
Explanation of the On-Screen Display
FUNCTION
OSD Format
DESCRIPTION
1
2
3
4
Focus Mode
Mirror Mode
Back Light
WBC Mode
5
Shutter
Speed
Non display
Non display
Non display
Non display
Normal shutter (NTSC:1/60 PAL:1/50)
8 variable.
7
Wait Mode
Wait
Indicates the camera stand-by mode.
until the camera power turns ON.
8.1 Sharpness
Adjustment
Mode Display
8.2 Brightness
Adjustment
Mode Display
8
Zoom
Display
x22
:
Optical Zoom only mode
x44
:
Digital Zoom x 2 mode
x220
:
Digital Zoom x 10 mode
6
Camera ID
After input the identification number to each camera,
Multi-point control is available. (000~255)
Automatic focus mode
Manual focus mode
No screen inverted
Screen is inverted to the left or right
Back Light compensation off
Back Light compensation mode
White Balance AUTO
Push Auto White Balance: In this mode
"Menu key" pressed, the white point traced
automatically (PWB Auto Mode), "Menu Key"
released, the white point preserved currently
(PWB Manual Mode).
Non display
1 / 125
1 / 10000
x18
x10
SHP
X10000 ID 255
WAIT
X132
1
2
3
4
5
6
7
8
4. WBC(White Balance Control) Display
See Page 17.
6. Camera ID Display
See Page 17.
5. Shutter Speed
Use to select the shutter speed.
7. Wait Mode
Indicates the camera stand-by mode
until the camera power turns on.
8. Example of Zoom, Brightness,
Sharpness Display
See Page 17.
2. Mirror
When IMAGE MIRROR is ON state. The
image is displayed in the opposite direction.
The appear during the mirror mode.
1. Focus
The appear during the focus manual
mode.
3. Back light Display
In case the excessive light is behind the
center object, it is necessary to prevent
the center object from too much
darkness. Turn the BACK LIGHT ON,
then the center object is not influenced
by the back light.
MENU
7 ZOOM START
8 ZOOM STOP
9 BRIGHTNESS
10 SHARPNESS
11 FOCUS
12 PROTOCOL
13 INIT SET
END
1
220
48
10
AUTO
DEF
ON
NO
NAME
FUNCTION
1
BACKLIGHT
Use to select BLC mode.
OFF
ㅡㅡ
>ON
2
5
SHUTTER
Use to select the shutter speed 8 steps.
NORMAL(NTSC:1/60, PAL:1/50),1/125,1/250,---,1/10000
7
ZOOM START
Use to change the zoom start position.
8
ZOOM STOP
Use to change the zoom stop position.
9
BRIGHTNESS
Use to change the brightness of scene (0~48).
10 SHARPNESS
Use to change the contour of scene (0~15).
11 FOCUS
.
AUTO : Set the focus mode to Auto mode.
.
PUSH AUTO : Set the focus mode to Push Auto mode.
12 PROTOCOL
.
DEF : Default
.
P / D : Pelco-D
13 INIT SET
Set the initial mode ON, the changed data are renewed.
Reset the data to its shipping condition.
6
CAMERA ID
To connect a large number of camera, identification
number can be assigned to each camera control easily.
(OFF, 1-255 : total number of ID is 256)
CAUTION : Set the ID number of camera, then
the ID number is displayed continuously.
3
4
WB CONTROL
.
AUTO : Maintain best color condition by controlling
the change of color automatically.
WB Range 2800
˚
K ~ 8000
˚
K
.
PUSH AUTO(PWB) : Can find White Balance exactly
in case precise WB maintenance
is needed under any environment.
--Turn the AUTO mode, WB acts automatically.
--Turn the PUSH AUTO mode, WB doesn't act.
SLOW SHUTTER
Use under very low light condition for full color
surveillance.
OFF
ㅡㅡ
>FLD2
ㅡㅡ
>
ㅡㅡㅡ
>FLD128
DAY & NIGHT
Use under low light condition for continuous
surveillance.
Auto
ㅡㅡ
>ON
ㅡㅡ
>OFF
/
TE
LE
/ W
ID
E
Move up and down
using the TELE/
WIDE button.
Can be changed
using the /
button.
MENU
1 BACKLIGHT
2 SLOW SHUTTER
3 DAY / NIGHT
4 WB CONTROL
5 SHUTTER
6 CAMERA
OFF
FLD24
OFF
AUTO
1/10000
123
