* *
Network Public Address System
Network Display terminal
POE6401
3
operation results.
8 USB key
U disk play / stop button; press the key to quit
setting state during address setting operation.
9
Key
Play mode: select previous track play function.
Set IP mode: move a screen leftwards / move a
bit leftwards, select viewed / set parameter
10 F1 key
It is used during volume adjustment, and it is
switched among three audio sources of auxiliary
input, microphone input and MP3 play volume.
11
Key
Play mode: select next track play function.
Set IP mode: move a screen rightwards / move a
bit rightwards, select viewed / set parameter
12 Set
Long press the key to enter IP address view state,
press it again, and enter IP setting state.
13 VOL-key
Play mode: volume down function.
View IP mode: switch and select the viewed
parameters.
Set IP mode: parameter plus-minus function.
14 VOL+key
Play mode: volume up function.
View IP mode: switch and select the viewed
parameters.
Set IP mode: parameter plus-minus function.
2.2 Introduction of the side panel
Micro SD
USB Disk
AUX lN
MIN MAX
Speaker
+
EMC OUT
24V
AUX OUT
MIC2
MIC1
24V
IN- IN+ A
B
OUT
+
OUT
COM
SC
COM
MUTE
2
3
4
5
6
7
8
10
11
9
POWER
广州市迪士普音响科技有限公司
Guangzhou DSPPA Audio Co.,Ltd.
网络播放终端
请勿打开,以免触电
警告
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION!
POE LAN
13
1
12
1
POE LAN
Connect 48V output, support AT mode, POE
output port power outputs above 25.5W POE
switch
2
USB Disk
Insert U disk at the interface or connect the
portable hard disk and other memory device, and
provide the program source for the built-in MP3
player.
3
Micro SD
Insert the SD card saved with host timing point at
the socket. When the terminal is disconnected,
the host machine plays the audio source at the
definite time.
4
Auxiliary input interface (AUX IN)
Connect the audio source device (such as
Figure (2) Side
panel
