Precautions
Please carefully read the following careful prior to operation and use.
Warning
In order to avoid the possible personal injuries, equipment or property loss to you and
others surrounding, please comply with the following basic precautions. These precautions
include but are not limited to the following cases:
Power / power cord
•
When the power cord plug is unplugged,
please seize the plug instead of the power cord.
Direct dragging of the power cord may lead to
damages.
•
Please do not place the power cord near the
heat source. Do not bend the power cord
excessively, and do not place it at the position
possibly trampled or causing trip.
•
The equipment is connected with the electric
network source through the power cord plug.
In case of any failure or danger of the
equipment, connection between the equipment
and the power grid can be disconnected by
unplugging the power cord plug. Therefore, it
is required to place the power socket at the
position convenient for swap operation of the
power cord.
•
When the power supply switch of the
equipment is in the "off" state, the machine is
not disconnected completely with the power
grid. The power cord plug shall be unplugged
from the power socket for safety when the
equipment is not used.
Laying position
•
Please disconnect the power supply prior to
movement of the equipment.
•
In order to avoid panel deformation or
damages to the internal components, do not
place the equipment in the extremely cold or
hot environment with dust or vibration.
•
The equipment cannot be subject to water
drop or water splash, and the vase filled with
water and other articles cannot be placed on
the equipment.
Connection
•
Before the equipment is connected with
other equipment, please disconnect the power
supply of these equipment firstly. Before the
power switch of the equipment is turned on or
turned off, please adjust all volumes to the
minimum.
•
The terminal marked with
symbol in the
equipment represents hazardous live, and
operation of connecting these terminals shall
be completed by the personnel guided.
When the abnormal circumstance is realized
•
In case of any wear or damage of the power
cord, if the sound is suddenly interrupted
during equipment use, or abnormal smell or
smoke is sent therefrom, the professionals
shall overhaul the equipment.
Precautions for operation processing
•
Please do not insert the finger into any gap
or opening of the equipment.
•
Avoid any foreign matter (paper, plastic or
