* *
Network Public Address System
Network Display terminal
POE6401
2
II. Description of the external appearance
2.1 Introduction of the front panel
1 Digital display screen and infrared remote
control receiving window
The digital display screen indicates the working
state and network information state of the machine.
The infrared remote controller is inserted at the
upper right corner of the display screen, and the
machine state can be controlled with the infrared
remote control.
2
STBY
The standby function indicator lamp is equal to the
mute function, and the network alarm and
emergency signal can open it. That is to say, the
alarm and emergency signal can cancel the mute
state.
3
Net Service
When the machine and the host machine are
successfully connected through the network, the
indicator lamp is on.
4 Timing
The terminal can be separated from the host
machine to implement the timing point edited.
When the terminal can be separated from the host
machine to implement the timing point, the
indicator lamp is on.
5 Signals
When the signal is output from the terminal power
amplifier, the indicator lamp is on. When the power
amplifier volume is gradually increased, the
indicator lamp is brightened gradually; when the
volume is gradually decreased, the indicator lamp is
darkened gradually.
6 Screw fixing hole
The terminal can be installed at the positions
similar to the wall. There are 4 fixed screw holes
on the machine, and the machine is fixed on the
wall surface with the with-machine screws during
installation.
7 Play / pause key
When the local MP3 program is played, the key
is used to conduct play / pause operation; during
address settings, the key is used to save setting
