DSPM Cobra Plus Standby Скачать руководство пользователя страница 11

Страница: 11 / 46

1.877.377.6769

Fax: 909.930.3335

Title:

Plus

Doc No.:

074-2000-00

Rev: A

Page#: - 11 -

Description:

Online Emergency Lighting Inverter Maintenance Manual

Date: 12/07/2015

GENERAL

The product is an advanced Emergency Lighting Inverter System based on Intelligent Microprocessor

Control. The Emergency Lighting Inverter System is an intelligent protector and provides pure, reliable

AC power to the emergency loads – protecting them from utility power blackouts, swells, sags, surges

and interference. All types of lamps are supported by our lighting inverter.
Under normal power conditions, this design enables the system to adjust and filter power fluctuations

continuously and automatically. In the event of a power failure, it can immediately provide back-up power

from the batteries without any interruption. When the utility power is connected or reconnected, the

charger will automatically recharge the batteries.

The Advanced Battery Management system in this unit uses a Digital Signal Processing/Pulse-Width

Modulation (DSP/PWM) Smart Battery Monitoring System for managing the system batteries. The DSP/

PWM Smart Battery Monitoring System is temperature compensated resulting in maintaining maximum

runtime and battery life. The microprocessor controls recharge and the DSP/PWM offer overcharge pro-

tection.

incorporates double-conversion technology that provides per-

fect protection specifically for Egress Lighting for facilities. It

The load is powered by the inverter, which receives its power from the

building source.

The inverter uses of a double-conversion principle eliminates all sources of unwanted power disturb-

ances. A rectifier converts the alternating current from the building source to Direct Current (DC). This

DC charges the batteries and powers the inverter. With the basic DC voltage, the inverter generates a

sinusoidal alternating current (AC) voltage, which continuously supplies the load. In times of power out-

rages, the 90-minute backup time that come standard in our units keep the load energized.

DEFINITIONS

Содержание Cobra Plus Standby















































Результаты поиска

Содержание Cobra Plus Standby

Отзывы:

Похожие инструкции для Cobra Plus Standby

Бренды по названию

Популярные бренды

DSPM Cobra Plus Standby, Руководство по обслуживанию

Результаты поиска

Содержание Cobra Plus Standby

Отзывы:

Похожие инструкции для Cobra Plus Standby

Бренды по названию

Популярные бренды