ISOSTEM USER MANUAL
GUI Software Reference 23
The levels of channels specifi-
cally allocated to 5.1 are moni-
tored by the system. If levels
pass a certain threshold value,
a new preset will be loaded
from the internal memory. The
transition between the presets
is performed smoothly using
crossfades.
In “Parallel” mode (“Auto 1”), if the levels on channels L, R, C, LFE, LS and
RS on AES inputs 1, 2 and 3 are low, the condition becomes true, other-
wise it becomes false.
In “Serial” mode (“Auto 2”), if the levels on channels C, LFE, LS and RS on
AES inputs 2 and 3 are low, the condition becomes true, otherwise it be-
comes false.
You configure the “Parallel” and “Serial” mode of channel automation by
activating the corresponding checkbox in the GUI. Checking “Off” disables
channel automation. The machine then monitors the corresponding chan-
nels as defined in the text below “Condition…” in the GUI and calls the cor-
responding preset defined in the “true” and “false” column.
“fall back” defines, that the device should re-enter the state it had before it
had entered another preset state within the channel automation handling.
Please note:
The three checkboxes “Auto 1: Serial”, “Auto 2: Parallel” and
“Off” represent also the current status of the device when being connected
to the device. This is important to know, because the auto modes also may
be invoked by GPI calls when configured in “GPI” mode (see above).
