ISOSTEM USER MANUAL
GUI Software Reference 21
A
UTOMATION
The "Automation" section offers several automated operating modes that
are selected with the "Mode", “GPI function” and “Channel Automation”
options. Among others, these options allow for locking the audio processing
parameters to fixed values, external preset switching and automated preset
switching triggered by the recognition of certain audio signal types.
Mode
The following mode options are available:
·
“
Manual
”: The unit is responding
to the GUI software parameters in real
time. The “GPI function” is not available.
·
“
GPI
”: The unit responds to exter-
nal GPI commands at the "GPI" Sub-D connector by loading one of
the 6 presets stored in its internal memory. Please refer to
Appendix
for the GPI connector's pin out scheme.
Please note:
In GPI mode the “Admin” and “Expert” tabs are
locked. Additionally the “GPI”/”Manual” mode changes the behavior
of the startup configuration (see below “Admin” Tab).
Current Values
This is a status display showing in real-time during a connection to a device
the number of the current “Preset Source” and the source of activation
which may be the GUI or a GPI switch.
GPI Function
This function allows to configure the action which should take place after
the corresponding GPI pin has been activated.
For each of the six GPI inputs you may choose one out of following actions:
·
None: No action to be invoked.
·
Preset 1…6: The corresponding preset is called.
·
Auto 1: Invoke “Parallel” channel automation (see below).
·
Auto 2: Invoke “Serial” channel automation (see below).
Please note:
To use these options the “Mode” has to be set to “GPI”.
