DSPeaker Anti-Mode X4, Руководство пользователя

Страница: 4 / 24

TM
O
WNER
'
S
M
ANUAL
1.Getting Started
What's included in the box
✔
The Anti-Mode X4 unit
(not pictured)
✔
A power cord for your country / region
✔
A calibration microphone with an XLR cable
✔
A microphone stand
✔
An infra-red remote controller
✔
This Owner's Manual
Installation
➢
Please read the safety and installation instructions before connecting and operating the
unit. Before proceeding to calibration, please connect at least one of the inputs and the
outputs that are relevant to your system.
➢
Anti-Mode X4 is intended to be used with cables of up to 3m in length. With longer
cables, observe electrostatic discharge precautions when connecting or disconnecting
them to avoid damage to equipment. Longer cables may also be susceptible to
electromagnetic interference.
➢
Place the Anti-Mode X4 unit on a stable base. Keep the ventilation openings clear.
IMPORTANT : Before connecting the Anti-Mode X4 unit to mains voltage, check
that the nominal voltage displayed on the back panel corresponds to the
voltage used in your area!
Language Selection
When the device is powered up for the first time, you are asked to choose a language. Use the
control wheel on the unit to highlight the language of your choice and click the wheel button to
select, i.e. press the control wheel towards the Anti-Mode X4 unit. If needed, the language can
be changed later from the ”System
” menu.
Rev. 1.0 2018-03-14 Page 4 (24)