DSPeaker Anti-Mode X4, Руководство пользователя

Страница: 21 / 24

TM
O
WNER
'
S
M
ANUAL
6.Firmware update
The firmware of Anti-Mode X4 is updated using an USB memory stick.
•
Format the USB memory to FAT format, if it isn’t already. It is beneficial to format it
regardless to get rid of unrelated data.
•
Download the firmware file (FIRMWARE.X4) and copy it to the USB memory stick in its
root directory.
•
Disconnect the power cable from the Anti-Mode X4 unit.
•
Attach the USB stick to the "SERVICE" USB port on the rear panel of the X4.
•
Connect the power cord of Anti-Mode X4 and wait until the system automatically installs
the firmware.
•
While the update is in progress, there is an hourglass image on the screen. Do not remove
the USB stick during the process. After finishing installation the system reboots, and the
home screen is displayed.
•
Now the USB stick can be removed.
If any problems are encountered during the install, there is an image of a moving USB stick on
the screen. In this case, make sure the USB stick is properly connected and contains the
firmware file before trying again. If the problem persists, try downloading the firmware file
again on a different USB memory stick.
The firmware is not updated if the unit already contains the same version of the firmware. In
this case, after checking the contents of the USB stick the unit will start normally.
Rev. 1.0 2018-03-14 Page 21 (24)