DSPeaker Anti-Mode X4, Руководство пользователя

Страница: 16 / 24

TM
O
WNER
'
S
M
ANUAL
Sound Menu
B
ASS
T
ILT
, T
REBLE
T
ILT
Bass tilt provides the user with a shelve-type filter to increase or decrease bass. Use the control
wheel to adjust the gain, with the wheel button pressed you can adjust the frequency. You can
also adjust the gain with + and – of the remote, and the frequency with the A and C profile
buttons.
Treble tilt works in the same way as the Bass tilt, but for the treble frequencies.
I
NFRASONIC
The very lowest frequencies can be eliminated from the output by using the infrasonic filter.
When enabled, the cutoff frequency can be adjusted from 2Hz to 200Hz using its own menu
item.
U
SER
EQ
With the User EQ tool you can create your own fully parametrizable filters. But be careful, a
straight amplitude response may not behave so nicely in the time domain!
H
EADROOM
Headroom defines how much reserve to keep in calculation to be able to boost frequencies
without the signal becoming saturated.
Reducing headroom may allow higher maximum output volume. However, digital clipping may
occur if too many boosting filters are used without sufficient headroom.
C
H
B
ALANCE
If you have an asymmetric listening position or speaker locations, channel balance adjustment
may be needed for the channels to appear equal loudness.
S
UB
L
EVEL
If the calibration included subs, their volume relative to the speakers can be adjusted manually.
M
ONO
S
UBS
Sets the system to use the same signal for both subs.
Rev. 1.0 2018-03-14 Page 16 (24)