ACQ16 USB Installation Manual
Maintenance
•
25
Maintenance
Introduction
This section describes routine maintenance procedures for the ACQ16 USB.
If the units needs repair, consult a Service Representative. Service and repair are
available only from the factory.
Cleaning
General
Clean the case when necessary as described below. If the ACQ16 USB is used in
dirty or dusty environments, cleaning should be performed more frequently.
When necessary, power down the acquisition system and disconnect the power cord.
Gently wipe the case with a damp rag and mild soap and water solution. Allow
surfaces to dry thoroughly.
Re-Certification of Performance
For continued Safe Operation and verification of specifications, it is recommended
that the ACQ16 USB be re-certified annually at the manufacturing facility.
