DSG InterPhone, Руководство по эксплуатации

Страница: 32 / 48

InterPhone Operation Manual
Making a Device-to-Phone Phone Call
Using an InterPhone to call a regular phone
To use InterPhone-to-Phone mode, you need to subscribe DSG Internet Telephony Network Service.
You will then have calling points stored directly into your 6-digit Device ID Number or into a 10-
digit ITSP Account. Please check http://www.dsgtechnology.com or refer to Chapter 6 How to
Subscribe Calling Points for further information. Use one of the methods as below to call the
remote party.
Step 1: Press I-PHONE button (LED on), pick up the handset or
press SPEAKER PHONE button and you will hear a ready
tone.
Step 2: Dial the receiver’s phone number as you usually do via
IDD.
Dialling the Phone Number
Step 1 Press I-PHONE button (LED on), pick up the handset or press SPEAKER PHONE button
and you will hear a ready tone.
Step 2 Press one speed dial button ranges from 1-21 that you have programmed.
Using the Speed Dial Buttons
4-4
n
Making a Device-to-Phone Phone Call
Note: Make sure you have valid calling points in your Device ID Number or ITSP Account before
you make Device-to-Phone calls.
Example: If you are in the US, your international access code will be 011. If the receiver’s phone
number is 81(country code), 3(area code), 5551234(phone number), dial 011-81-3-5551234 to
call.